Select the passenger side front Support Bracket, (Figure 6).
Attach the flat end of the Support Bracket to the Nut Plate with
(1) 10mm x 30mm Hex Bolt, (1) 10mm Lock Washer and (1)
10mm Flat Washer, (Figure 5 & 6). Do not tighten hardware at
this time.
STEP 4
Determine the next procedure for your model and year.
All 1500 Models:
Attach the bent end of the Front Support Bracket to the top hole
in the Front Mounting Bracket with (1) 10mm x 30mm Hex Bolt,
(2) 10mm Flat Washers, (1) 10mm Lock Washer and (1) 10mm
Hex Nut, (Figure 7). Do not tighten at this time.
Up to 2010 25-3500 Models only (IMPORTANT: front
and center Support Brackets are not required on
2011-16 25-3500 Models-skip to Step 8):
Note that the Front Support Bracket will not reach up to the
lower slot in the Mounting Bracket, (Figure 8). Tighten the
STEP 5
Support Bracket to the Nut Plate in the frame. Carefully push up
on the Support Bracket until it reaches the lower slot, (Figures 8
& 9). Attach the Support Bracket to the back of the Mounting
Bracket with (1) 10mm x 30mm Hex Bolt, (2) 10mm Flat Wash-
ers, (1) 10mm Lock Washer and (1) 10mm Hex Nut, (Figure 9).
Do not tighten at this time.
IMPORTANT: 2011-16 25-3500 models, skip to Step 8,
front and center Support Brackets are not required. All
other models, continue to Step 3.
Move to the passenger side front mounting location. Locate the
two factory holes in the bottom of the frame towards the front
of the vehicle, (Figure 4). Insert (1) 10mm Nut Plate into the oval
hole and line up the threaded nut with the forward round hole,
(Figure 5).
STEP 3
Locate factory holes
in bottom of frame
Front
(Fig 4) Insert Nut Plate into large slot in frame
10mm Nut Plate
10mm x 30mm Hex Bolt
10mm Lock Washer
10mm Flat Washer
(Fig 5) Line up Nut Plate with small hole in frame
Front
3/5
(Fig 6) Attach passenger/right front
Support Bracket to Nut Plate in frame
10mm x 30mm Hex Bolt
10mm Lock Washer
10mm Flat Washer
10mm Nut Plate
Front
Customer Support: www.TygerAuto.com/Contact
