4/5
Repeat Step 3 to install the 12mm Single Bolt Plate, (Fig 10), into
the remaining hole in the other side of the frame channel and
Bracket, (Figs 8 & 11).
STEP 4
IMPORTANT
:
The Brackets are designed with (2) mounting positions to fit
multiple years. Most Silverado/Sierra models will use the “back”
mounting position with the Brackets pushed in to install the Tyger
Guard closer to the bumper, (Fig 8). Some years may require the
forward mounting position to move the Tyger Guard forward or to
provide more clearance for accessory lights, (Fig 12).
STEP 5
(1) 12mm Double Bolt Plate
(2) 12mm Flat Washers
(2) 12mm Nylon Lock Nuts
(1) 12mm Single Bolt Plate
(1) 12mm Flat Washer
(1) 12mm Nylon Lock Nut
Fig 8
Front
(Fig 9) Inner driver side Bracket
with Double Bolt Plate
(1) 12mm Double Bolt Plate
(2) 12mm Flat Washers
(2) 12mm Nylon Lock Nuts
Fig 10
Front
(Fig 11) Outer driver side
Bracket with Single Bolt Plate
(1) 12mm Single Bolt Plate
(1) 12mm Flat Washer
(1) 12mm Nylon Lock Nut
(Fig 12) Forward
mounting position
Customer Support: www.TygerAuto.com/Contact
