8000060 Rev 1 23-Feb-18
22
Now your weather station is connected to the Weather Underground weather server. Please
note that
“WS Tool” is only used for setup of the weather station and linking to Weather
Underground. The readings showing on the WS Tool app are not accurate. Download the
“Weather Underground: Forecasts” app to check your weather station real time and history
records. Once you install the app, locate your station by searching for your Station ID and
make it your favorite.
You can also configure upload to weathercloud and weatherobservationswebsite (WOW) if you
like to. These are optional and they are setup in a similar way to weatherunderground.
2. Installing and Configuring Weathersmart WiFi Software
The Weathersmart software can only connect to the display console via WiFi if both the
display console and computer are connected to the same WiFi network.
1. Install the software to the computer
2. Open the Weathersmart application
3. The application will pop-up a window asking for Local IP. Select the IP address of your
computers WiFi connection.
4. Once the Weathersmart software loads, Go to System | Select Device and select the
Easyweather device from the drop down. Normally there will only be one Easyweather
device connected to the network. If there are more than one device, select the device
you want to connect to.
5. If no devices are shown in the select device dropdown then the display console is not
connected to the same WiFi network as the computer. You need to figure out why and
correct the configuration. When the WiFi symbol
on the display console is turned
on, it means that it is connected to a WiFi network.