Model
TP-SW8GAT/24-SFP & TP-SW8GAT/BT/24-SFP
Product
Industrial 8+2 Managed PoE Switch
Console Port
38400 Baud, 8 Bit, N parity, 1 stop bit, N flow control
Reset Button
Press for <1sec to reset the switch, press for >5sec to reset to factory defaults
PoE Ports
TP-SW8GAT/24-SFP
8*10/100/1000M
Port 1~8 supports 24V Passive PoE or 802.3at PoE (MAX 30W per port)
TP-SW8GAT/BT/24-SFP
8*10/100/1000M
Port 1~2 supports 24V Passive PoE or 802.3at PoE (MAX 30W per port)
Port 3~4 supports 802.3bt PoE (MAX 90W per port)
Port 5~8 supports 802.3at PoE (MAX 30W per port)
Uplink Ports
2*10/100/1000M SFP
Function Interface
1: HW RET Button for quick formation of ring network. Needs to be enabled in User Interface of master switch.
2: Dual independent power inputs with over/under voltage protection.
3: Alarm input with a range of 5-57VDC 0.5mA. Detects alarm input voltage changes.
4: Alarm/Relay output (<60V <3A), can define various custom condition triggers.
5: TMS Environmental temperature and humidity detection.
6: Real-time system of crucial voltage monitoring using alarm output function.
7: Real-time system temperature, environment temperature, humidity using alarm output function.
8: Real-time detection and display of input voltage, current, power.
9: Multiple custom port control and intelligent management.
Network protocol
IEEE 802.3x
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
IEEE 802.3ad
IEEE 802.3q, IEEE 802.3q/p
IEEE 802.1w, IEEE 802.1d, IEEE 802.1S IEEE 802.3z 1000BASE-X
STP (Spanning Tree Protocol)
RSTP/MSTP (Rapid Spanning Tree Protocol) EPPS ring network protocol
EAPS ring network protocol
IEEE 802.3af, 802.3at, 802.3bt
AUTO/24V Passive PoE PSE
Environment
Detection
TMS temperature and humidity sensor
Port Specification
1-8 port 10/100/1000BaseT(X)auto detection, AUTO-MDI/MDI-X
Transmission Mode
Store and Forward (full wire speed)
Bandwidth
56Gbps
Packet Forwarding
14.44Mpps
MAC
8K
Buffer
4.1M
Transmission
Distance
10BASE-T: Cat3,4,5 UTP
(≤250 meter)
100BASE-TX: Cat5 or later UTP
(≤100 meter)
1000BASE-TX: Cat6 or later UTP
(≤1000 meter)
1000BASE-
SX: 62.5μm/50μm MMF(2m~550m)
1000BASE-
LX: 62.5μm/50μm MM(2m~550m) or 10μm
SMF(2m~5000m)
BIDI supported
FLASH
16M
RAM
128M
Power
Standby power consumption
≤5W
Network full-load power consumption
≤15W
Whole device full-load power consumption
≤360W
LED Indicator
Port 9-10: (SFP LED)
TP-SW8GAT/BT/24-SFP: PoE Port 1-2:(Green=48V; Orange=24V)
TP-SW8GAT/24-SFP: PoE Port 1-8:(Green=48V; Orange=24V)
Link port:(Green=Link LED
）
PWR:( Power/system LED), Flashing means Normal Power
V1: (Master power LED)
V2: (Slave power LED)
HW:(Ring network ON LED)
Power Input
Dual independent power inputs: Switch Only: 12-37VDC / PoE Enabled: 37-57VDC
Operating
Temp/Humidity
-40
～
+80°C, 10%
～
90% RH Non-condensing
Storage
Temp/Humidity
-40
～
+85°C, 5%
～
95% RH Non-condensing
Lightning
Protection Level
6KV 8/20us, 8KV ESD
Environmental
Protection Level
IP40
Product Size(L*W*H)
160mm*130mm*45mm
Hardware Parameter
