User’s Manual
TYCON TP-SSW5(-NC)
TYCON POWER SYSTEMS
4
*PWR Indicator
LED
STATUS
Description
Power
Green
LED ON if power input has valid power
apply.
Red
LED ON if the following condition
happens.
*Power input under voltage (Vin<10V)
*Power input over voltage (Vin>59V)
*PoE over current (2A/per port)
the indicator is used on current model
only.
Off
No power in DC input
*SWITCH LED (the right indicator on RJ45)
LED
STATUS
Description
P1~P4 & UP LINK
Link/Act
Green
A network device is detected, but no
communication activity is detected.
Blinking
@43ms
This port is transmitting to, or receiving
package from another device at 100Mbps.
Blinking
@120ms
This port is transmitting to, or receiving
package from another device at 10Mbps.
Off
No device is detected.
