MM-012099-001
98
To quickly view multiple group scan status, press either
or the
key. Then slowly
but consistently rotate the group knob. Each group status will appear on the display.
10.18.3 Deleting Groups from a Scan List
P5450 Model Radio
1.
With scan operation turned OFF, select the desired group to delete from the selected trunked system
group scan list.
2.
Press
. The current status of the group is displayed for a time-out period.
3.
While the current status is displayed, press
. until the group from the scan list is "
blank
". The
sequence is "
blank
", , , ,"
blank
". Any group that is not in a trunked system group scan list will
show a "
blank
" for the time-out period when it is the selected channel.
P5470 Model Radio
1.
With scan operation turned OFF, select the desired group to delete from the selected trunked system's
group scan list.
2.
Press
. The current status of the group is displayed for a time-out period.
3.
While the status is displayed, press
to delete the group from the scan list. , ,or turns OFF.
Any group that is not in a trunked system group scan list will show a "
blank
" for the time out period
when it is the selected channel.
10.18.4 Nuisance
Delete
A group can also be deleted from the scan list, if it is not the currently selected group, by pressing the
key (P5450 model) or the
key (P5470 model) during scan operation while the radio is displaying the
unwanted group. The group will be deleted from the system's group scan list in the same manner as if
done using the steps above. Deletions done in this manner will not remain deleted if the radio is powered
OFF and then powered ON.
10.19 SCANNING
TRUNKED
SYSTEMS
The radio can be programmed with the following System Scan features. These features are automatically
enabled when the radio is powered ON. A key or menu option is also defined to allow the System Scan
features to be toggled during radio operation. The System Scan state will be maintained through system
changes but will default to ON when the radio is powered ON.
Enable/Disable via Menu Selection
Press
and then use the
or
buttons to scroll through the selections until
SYS SCAN
is
displayed. Then press
to toggle the System Scan state. The
SYSC ON
or
SYSC OFF
display
message is displayed for two seconds to show the new state.
Enable/Disable via Pre-Programmed Keypad Key
Press the key pre-programmed to toggle System Scan and the
SYSC ON
or
SYSC OFF
display message
is displayed for two seconds to show the new state.
Summary of Contents for P5400 series
