Warnings
y
This product is intended for professional installation, please follow local
wiring regulations.
y
To meet EU security immunity requirements this product should be used
with an Uninterruptable Power Supply to feed the mains input of any power
adaptor.
y
The product should be powered by a limited power supply (LPS) sized
according to the product rating label.
y
The LAN symbol on the unit means this is not intended for connection to a
public network or a LAN from a different building.
y
Do not install where children are likely to have access.
© 2020 Johnson Controls. All rights reserved.
JOHNSON CONTROLS, TYCO and ILLUSTRA are trademarks and/or
registered trademarks. Unauthorized use is strictly prohibited.
Adjusting the camera position
Figure 3
3
2
1
1.
Rotate:
The rotate range of the 3-axis gimbal is 0° to a minimum of
355°.
2.
Tilt:
The tilt range of the 3-axis gimbal is 0° to 67°.
3.
Pan:
The pan range of the 3 axis gimbal is 0° to 355°.
Table 3: Mounting plate symbols and descriptions
Symbol
Name
Description
A
Single Gang Box
Attach the plate to a North American
single gang electrical box.
B
Octagon Box
Attach the plate to a North American
octagon electrical box.
C
Double Gang Box
Attach the plate to a North American
double gang electrical box.
D
4S Junction Box
Attach the plate to a North American
4 inch square electrical box.
Removing or installing the dome cover
To remove the dome:
y
Hold the camera dome (6) (Figure 1) with one hand and rotate the
camera base (2) (Figure 1) to unlock it and remove it from the dome.
Note:
The camera dome includes a ‘lock’ and ‘unlock’ symbol to assist
with the above step.
To install the dome:
y
Hold the camera dome (6) (Figure1) up to the camera base (2) (Figure 1)
and rotate the camera dome to securely lock it to the camera base.
Note:
The camera dome includes a ‘lock’ and ‘unlock’ symbol to assist
with the above step.
PT01-005693A
