408- 10309
SDE- SA Commercial Hand Tool Assembly for UTILUX Connectors
Rev
D
4
of 4
Tyco Electronics Corporation
7.2. Inspection
Close the tool handles until the ratchet releases, and
then allow them to quickly open freely. If they do not
open quickly and fully, the spring is defective. See
Section 8, REPLACEMENT.
8. REPLACEMENT
Order replacements through your Tyco Electronics
representative, or call 1--800--526--5142, or send a
facsimile of your purchase order to 717--986--7605, or
write to:
CUSTOMER SERVICE (038--035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105--3608
9. REVISION SUMMARY
S
Removed Die Assembly 2119156--2.
Die Sets 2063765-2 and 1976147-2 Can be Used in Tools Show Below
PRO-CRIMPER III Hand Tool 354940-1
(Instruction Sheet 408-9930)
SDE Bench Terminator 1490076-2
(Customer Manual 409-10052)
Battery Tool (Shouldered Die) 1725837-1, -2
(Customer Manual 409-10053)
Battery Tool (Pin Die) 1213890-1, -2
(Customer Manual 409-10065)
626 Adapter 679304-1
(Instruction Sheet 408-4070)
SDE-SA Hand Tool 9-1478240-0
(Instruction Sheet 408-8851)
