FOMS-FPS-O-XXXX-XX
I N S T A L L A T I O N
I N S T R U C T I O N
19” 1HU Splicing and Front Patching Shelf
1 Introduction
2 General
2.1 Characteristics
2.2 Kit contents
2.3 Tools
3 Installation
3.1 Preparation of the shelf for patch-patch
3.2 Routing of the pigtails (patch-patch)
3.3 Preparation of the shelf for splice-patch
3.4 Termination of loose tube
3.5 Termination of IFC
3.6 Termination of ribbon and microgain
3.7 Routing and splicing
3.8 Closing the shelf
Contents
1
Introduction
The FOMS-FPS-O shelf is a mechanical enclosure for a physical fiber management system.
It is used for splicing and connector patching: depending on type up to 24 fibers can be
connected (in case of SFF up to 48 connections can be made).
Follow all local safety regulations related to optical fiber plant elements.
For cleaning components, the use of isopropylalcohol is recommended.
2
General
2.1
Characteristics
Compatible with standard 19” rack, back or front mounting or in FIST-GR2 racks
Dimensions: width =
481 mm
height =
44 mm (fits in 1 HU 19”)
depth =
210 mm, 270 mm including plastic frontcover (optional)
Summary of Contents for FOMS-FSP-O Series
Page 11: ...11...
