408-8808
1U 24-Port Patch PanelDrawer 1933443-1
Rev C
4 of 4
Tyco Electronics Corporation
3. Slide the tray into the cover until the push tabs
“click” onto the cover. Make sure that there are no
fibers pinched between the cover and the tray.
Refer to Figure 6.
Figure 6
Interface Housing
Label Plate
Drawer Shown
Front Mounted
Push Tab
(2 Places)
4. REPLACEMENT AND REPAIR
DO NOT use any damaged or defective housings.
DO NOT disassemble any of the housings.
The drawers, interface housings, and jack SL
housings are not repairable if damaged. Order
additional drawers, interface housings, or jack SL
housings through your representative, or call
1–800–526–5142, or send a facsimile of your
purchase order to 1–717–986–7605, or write to:
CUSTOMER SERVICE (038–035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105–3608
5. REVISION SUMMARY
Revisions to this instruction sheet include:
S
Updated document to corporate requirements
S
Superceded drawer part number
S
Modified Figure 1 and Section 2
