408-1976
5
of 5
Rev
C
4. Check the clearance between the bottoming
surfaces of the crimping jaws. If the clearance is
0.025 [.001] or less, the ratchet is satisfactory. If
clearance exceeds 0.025 [.001], the ratchet is
out of adjustment and must be repaired. See
Section
5,
REPLACEMENT AND REPAIR.
5. REPLACEMENT AND REPAIR
Replacement parts are listed in Figure 6. Parts other
than those listed in Figure 6 should be replaced by
Tyco Electronics to ensure quality and reliability of the
tool. Order replacement parts through your Tyco
Electronics representative, or call 1-800-526-5142,
or send a facsimile of your purchase order to 1-717-
986-7605, or write to:
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
For tool repair service, please contact a Tyco
Electronics representative at 1-800-526-5136.
6. REVISION SUMMARY
Since the previous release of these instructions, the
TE logo was applied.
Figure 6
Customer-Replaceable Parts
Item
Part Number
Description
Qty Per Assembly
1
39364 SPRING
1
2
21045-6
RING, Retaining
2
3
2-23620-9
PI N, Retaining
1
4
1-23619-6
PI N, Retaining
2
5
21045-3
RING, Retaining
4
76.2
[3.00
(Closed)
279.4 [11.00]
19.05 [.750]
WEIGHT: 594 g [1 lb. 5 0z.]
