408-2766
Coaxial Cable Stripper Kits 603995-[]
Rev D
6 of 6
Tyco Electronics Corporation
7.1. Installation of Adjustment Gauge
The gauge is marked with different cable types. Install
gauge so that the markings, which correspond to the
cable type to be stripped, are above the adjustment
screws; see Figure 20. Close the tool.
Figure 20
Gauge
7.2. Screw Adjustment
1. Rotate the blade adjustment screws (A or B)
clockwise until they touch the gauge; see
Figure 21.
2. Open the tool and remove the gauge.
3. Install the cassette, and the tool is now ready for
use.
Figure 21
A
B
Blade
Adjustment
Hex Screws
8. REPLACEMENT PARTS
The parts listed in Figures 2 and 11 are customer–
replaceable. A complete inventory can be stocked
and controlled to prevent lost time when replacement
of parts is necessary. Order replacement parts
through your Tyco Electronics Representative, or call
1–800–526–5142, or send a facsimile of your
purchase order to 1–717–986–7605, or write to:
CUSTOMER SERVICE (38–35)
TYCO ELECTRONICS CORPORATION
P. O. BOX 3608
HARRISBURG, PA 17105–3608
9. REVISION SUMMARY
Since the previous release of this sheet, the following
changes were made:
S
Updated document to corporate requirements
S
New format
