Instruction sheet
411-15684
31-Oct-03, Rev. O
GENERAL RECOMMENDATION OF USE
FOR 45° SHIELDS G4 WITH DRAKA CABLE
1 to 4
Tyco Electronics France Sas
B.P. 39, 95301 CERGY-PONTOISE Cedex
©2002 Tyco Electronics Corporation
All International Rights Reserved
(Tous droits réservés)
LOC F
Ce document est sujet à modifications. Contacter Tyco Electronics pour identifier la dernière révision et en
obtenir une copie. Personnel Tyco Electronics : consultez la base de données StarTEC.
This document, managed by Tyco Electronics France, is archived in the Startec database.
A printout cannot be considered as a controlled document
1 -
INTRODUCTION
1.1. Objective
This specification describes the mandatory procedure to be followed during the
assembly of the harness with the 45° shields with
Draka cable for :
a) positioning the ferrule before crimping,
b) crimping the ferrule,
c) crimping the two upper shield legs down the lower shields.
WITH BRAID CABLE
WITH DRAKA CABLE
1.2. Components
a) MQS socket housings 4 positions loaded with 3 contacts which are crimped on
the cable wires according general recommendation 411-15677.
Note
: either the “Draka cable” or the “braid cable”
are self supplied by the customer.
“Draka cable” reference number of Draka Deutschland is FLR91XCC33X according
specification data sheet number DF055-1999, issue B/24.08.00/Ve/Ot.
b) Ferrule (Tyco part number 0-953903-1)
c) Upper 45° shield assembly (Tyco part number 0-1379633-1)
d) Lower 45° shield assembly (Tyco part number 0-1379634-1)
