408-10254
PARALIGHT Active Optical Cable Assemblies
Rev A
2 o f 2
Tyco Electronics Corporation
Figure 2
2A
2B
2C
Align QSFP Plug
with Receptacle
Insert Plug into
Receptacle
Until It Bottoms
Pull on Pull
Tab" toRemove
(DoNOT Pull
on Cable)
2. Insert the plug into the receptacle until it
bottoms. See Figure 2B.
3. To remove the plug from the receptacle, pull
back on the “pull tab” in the indicated direction until
it is removed as shown in Figure 2C.
4. HANDLING
Maximum bend radius of the optical cable per
ICEA–596 in the unloaded and install condition is
29 mm and in the loaded condition during installation
is 58 mm.
This product is classified as a Class 1M Laser product
in accordance with IEC 60825–1:1993+A1+A2 and
complies with 21CFR 1040.10 and 1040.11 except for
deviations pursuant to laser notice No. 50, dated
24–Jun–2007.
Do not cut or view a damaged fiber optic cable
with the naked eye or magnification instrument.
For use with UL Listed ITE computing or
telecommunication devises having SELV I/O
connections only.
5. REVISION SUMMARY
S
Initial release of document
DANGER
NOTE
i
