TYAN YR188-B537M Service Manual Download Page 72

Page: 72 / 118

http://www.tyan.com

5.7.2 IDE Configuration Sub-Menu

You can use this screen to select options for the IDE Configuration Settings. Use the

up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change
the value of the selected option.

Feature

Option

Description

IDE Configuration

Enhanced

Disabled

SATA Configuration

Compatible

This defines the operation mode of
SATA channel.

NOTE:

This item can only be displayed

when

Configure SATA as

is set to

[IDE].

IDE

RAID

Configure SATA as

AHCI

Select legacy IDE, RAID or AHCI as the
SATA interface.

Disabled

Hot Plug

Enabled

Available if either RAID or AHCI is
enabled. Provides Hot Plugging
capability.

Disabled

Hard Disk Write Protect

Enabled

Enable/Disable device write protection.
This will be effective only if device is
accessed through BIOS.

Summary of Contents for YR188-B537M























































































































Search results

Summary of Contents for YR188-B537M

Reviews:

Related manuals for YR188-B537M

Brands by name

Popular brands

TYAN YR188-B537M, Service Manual

Search results

Summary of Contents for YR188-B537M

Reviews:

Related manuals for YR188-B537M

Brands by name

Popular brands