Trinity KT400 S2495
Chapter 3: BIOS Setup
3-21
http://www.tyan.com
PS2KB / MS Wakeup from S3/S4/S5:
This item allows you to set a Hot Key to wake-up the system by PS2 Keyboard.
Disabled / Ctrl+F1 / Ctrl+F2 / Ctrl+F3 / Ctrl+F4 / Ctrl+F5 / Ctrl+F6 / Ctrl+F7 / Ctrl+F8
/ Ctrl+F9 / Ctrl+F10 / Ctrl+F11 / Ctrl+F12 / Power / Wake / Any Key
Note:
Power and Wake are the Windows98 Keyboard button.
VGA:
When set to “On”, any event occurring at a VGA port will awaken a system, which has been
powered down.
On / Off
LPT & COM:
When set to “LPT/COM”, any event occurring at a COM (serial) / LPT (printer) port will awaken
a system, which has been powered down.
LPT/COM
HDD & FDD:
When set to “On”, any event occurring at a hard or floppy drive port will awaken a system,
which has been powered down.
On / Off
PCI Master:
When set to “Off”, any event occurring to the DMA controller will awaken a system, which has
been powered down.
On / Off
PowerOn by PCI Card:
An input signal from PME on the PCI card awakens the system from a soft off state.
Enabled / Disabled
Wake Up On LAN / Ring:
Defines whether the system will wake up if the modem is dialed into.
Enabled / Disabled
RTC Alarm Resume:
Defines the time / date when the system will wake up.
Enabled / Disabled
