10
http://www.tyan.com
2.2 CMOS Reset (JP1)
If you have been locked out of your system because you forgot your password, or set the CMOS
incorrectly, or have just finished flashing your BIOS, you will need to reset the CMOS. The
instructions are as follows:
1.
Power off the system
2.
Close pins 2-3 on JP1
3.
Wait about three seconds
4.
Close pins 1-2 on JP1, then power on the system again
By following this procedure, you will erase your password and reset the CMOS. The location of
JP1 is shown in the diagram below.
JP1
CLOSE 1-2
CLOSE 2-3
Normal
Clear CMOS
* default is CLOSE 1-2
Summary of Contents for TRINITY I845
Page 3: ...3 http www tyan com...
Page 7: ...7 http www tyan com...
