TYAN Transport TA26 B2932, Service Manual

Page: 35 / 81

Chapter 2: Setting Up 27
Note: The FDD rails each have a flat side which should be
against the body of the floppy drive when installed. There is
also a spring catch mechanism on the right hand rail (when
looking at the floppy disk drive from the front).
3. Plug the FDD power and data cables into the ports on the
back of the floppy disk drive.
4. Thread the cables out through the back of the empty
drive bay. Slide the floppy disk drive into the drive bay
until it clicks into place and fits flush with the front panel.