TYAN Transport SX TN70E-B8026, Service Engineer'S Manual

Page: 31 / 96

31
http://www.tyan.com
2.1.3 Installing the CPU and Heatsink
Follow the steps below on installing CPUs and CPU heat sinks.
1.
Use a T20 Torx screwdriver to loosen the screws securing the force frame in a
sequential order (3->2->1).
Note: The force frame will automatically eject after the captive screws are being
released.
2.
By placing your both index fingers on the sides on the metal handle, pull to
release the rail frame. Then lift the rail frame to its fully open position.
3.
Remove the external cap from the rail frame.