TYAN Toledo i3100 S5207 User Manual Download Page 39 | Manualshive

Page: 39 / 49

background image

39

http://www.TYAN.com

Allocate IRQ to PCI VGA

Yes: Assign IRQ to PCI VGA card if card requests IRQ.
No: Does not assign IRQ to PCI VGA card even if card requests an IRQ.

Palette Snooping

Enabled: informs the PCI devices that an ISA graphics device is installed in the system so
the card will function correctly.

3.5 Boot

BIOS Setup Utility

Main Advanced PCIPnP

Boot

Security Chipset Exit

Boot Settings

X

Boot Settings Configuration

1

st

Boot Device [USB:ATP ATP Petito]

2

nd

Boot Device [USB:ATP ATP Petito]

3

rd

Boot Device [Network: IBA GE slo]

4

th

Boot Device [Network: IBA GE slo]

Configure Settings during
System Boot.

←

Select Screen

↑↓

Select Item

Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
Esc Exit

3.5.1 Boot Settings Configuration

Boot

Boot Settings Configuration

Quick Boot                                                          [Disabled]
Quiet Boot                                                          [Disabled]
AddOn ROM Display Mode        [Force BIOS]
Bootup Num-Lock                                                        [On]
PS/2 Mouse Support                                                [Auto]
Wait for F1 if Error                                              [Enabled]
Hit “DEL” Message Display            [Enabled]
Interrupt 19 Capture                 [Enabled]
Endless Boot                                                      [Disabled]
Auto Eject Function                                          [Disabled]

Allow BIOS to SKIP certain
tests while booting. This
will decrease the time
needed to boot the system.

←

Select Screen

↑↓

Select Item

+- Change Option
F1 General Help
F10 Save and Exit
Esc Exit

Quiet Boot

Disabled: Displays normal POST messages.
Enabled: Displays OEM Logo instead of POST messages.

AddOn ROM Display Mode

Force BIOS/ Keep Current

Set display mode for Option ROM.

Interrupt 19 Capture

Enabled: Allows option roms to trap interrupt 19.

«
...
37
38
39
40
41
...
»

Summary of Contents for Toledo i3100 S5207


















































Reviews:

No comments

Related manuals for Toledo i3100 S5207

Brand: IEI Technology Pages: 211

Brand: IEI Technology Pages: 8

Brand: IEI Technology Pages: 8

Fatal1ty Z170 Gaming K4 Series

Brand: ASROCK Pages: 163

Brand: Abit Pages: 104

Brand: AOpen Pages: 156

Brand: Elitegroup Computer Systems Pages: 82

Brand: QDI Pages: 22

Brand: Acrosser Technology Pages: 7

phyBOARD-Subra-i.MX6

Brand: Phytec Pages: 2

Brand: BIGTREETECH Pages: 39

FEBFL7701_L31H008A

Brand: Fairchild Pages: 24

Brand: MSI Pages: 92

Brand: LanParty Pages: 141

Brand: Gigabyte Pages: 44

Brand: Silicon Laboratories Pages: 9

Brand: Foxconn Pages: 108

Brand: Fastrax Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands