http://www.tyan.com
22
Figure 16
Installing the Passive Processor
The installation of the passive processor differs only slightly from that of the
active processor. Your passive CPU package should contain one CPU reten-
tion module, one heat sink retention bracket with mounting locks, two mount-
ing attachments, and one heat sink lock.Install the retention module as
explained in the active processor section.
The heat sink mount (Figure 17)
has two pins on the bottom and
four pins on the top. Notice that
the bottom two pins are of
different sizes. The size of the
pins and the holes in the mother-
board will determine the correct
orientation. When the bracket is correctly installed, the four pins on top will be
right next to the Pentium II CPU slot.
Insert the heat sink mount into the holes on the motherboard. When the
bracket is properly inserted into the holes on the motherboard, you will hear a
clicking noise.
Figure 17
Chapter 2
Board Installation
All manuals and user guides at all-guides.com
