19
http://www.tyan.com
2.19 – Installing the Power Supply.
There are three power connectors on your Tiger MPX. By default, the Tiger MPX requires that you
have an ATX12V power supply that has the small 4-pin square connector as well as the standard
20-pin ATX connector. However, we have made sure that if you do not meet the power
requirements by having an ATX12V power supply, you can still use your Tiger MPX.
By utilizing an Auxiliary drive power connector, you can use virtually any existing ATX 2.01/2.03
standard power supply to operate the Tiger MPX. Simply attach the connectors and proc eed
forward. Also, it is not necessary to connect all three and there is no harm in doing so.
NOTE
The S2466 Tiger MPX auxiliary drive power connector must be independent of
any other devices. A device such as a DVD/CD-ROM drive, hard drive, or any
other devices cannot be attached onto the same power line. If connected, system
stability is compromised.
2.20 –
Finishing Up
Congratulations on making it this far! You’re finished setting up the hardware aspect of your
computer. Before closing up your chassis, make sure that all cables and wires are connected
properly, especially IDE cables and most importantly, jumper cables. You may have difficulty
powering on your system if you properly connect motherboard jumpers.
In the rare circumstance that you experienced difficulty even though the instructions herein were
followed, you can find help by asking your vendor for assistance. If they are not available for
assistance, please find setup information and documentation online at our website or by calling
your v endor’s support line.
Website: http://www.tyan.com
