57
3.3.9 Console Redirection
PhoenixBIOS Setup Utility
Main
Advanced
Memory Security Boot Power Exit
Console Redirection
Item Specific Help
Com Port Address
Baud Rate
Console Type
Flow Control
Console connection:
Continue C.R. after POST:
[Disabled]
[19.2K]
[PC ANSI]
[CTS/RTS]
[Direct]
[Off]
F1
Help
↑↓
Select Item
-/+
Change Values
F9
Setup Defaults
Esc
Exit
←
→
Select Menu
Enter
Select
X
Sub-Menu
F10
Previous Values
Com Port Address
If enabled it will use a port on the motherboard.
Disabled
/ On-board COM A / On-board COM B
Baud Rate
This feature is used to enable the specified baud rate.
300 /
19.2K
/ 1200 / 2400 / 9600 / 38.4K / 57.6K / 115.2K
Console Type
This feature is used to enable the specified console type.
VT100 / VT100.8bit / PC-ANSI, 7bit /
PC ANSI
/ VT100+ / VT-UTF8
Flow Control
This feature is used to enable the flow control.
None / XON/XOFF /
CTS/RTS
Console Connection
This feature is used to indicate whether the console is connected directly to the
system or a modem is used to connect.
Direct
/ Via modem
Continue C.R. after POST
This feature is used to enable console redirection after OS has loaded.
Off
/ On
