TYAN Thunder n3600QE S4980, User Manual

Page: 40 / 90

http://www.tyan.com
40
3.7.2 IDE Configuration Sub-Menu
You can use this screen to select options for the IDE Configuration Settings.
Use the up and down <Arrow> keys to select an item. Use the <Plus> and
<Minus> keys to change the value of the selected option.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
IDE Configuration
Onboard IDE Controller
Serial -ATA Devices
4
nVidia RAID Setup
4
Primary IDE Master
4
Primary IDE Slave
4
SATA0 (Dev5, Func0)
4
SATA1 (Dev5, Func0)
4
SATA2 (Dev5, Func1)
4
SATA3 (Dev5, Func1)
4
SATA4 (Dev5, Func2)
4
SATA5 (Dev5, Func2)
Hard Disk Write Protect
IDE Detect Time Out (Sec)
ATA(PI) 80Pin Cable Detection
[Enabled]
[Device 0/1/2]
[Disabled]
[35]
[Host & Device]
While entering setup,
BIOS auto detects the
presence of IDE
devices. This displays
the status of auto
detection of IDE
devices.
← →
Select Screen
↑↓
Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Feature Option Description
IDE Configuration
Enabled
Onboard IDE Controller
Disabled
Enable/Disable onboard IDE controller.
Device 0/1/2
Disabled
Device 0
Serial -ATA Devices
Device 1/1
Configure serial ATA devices.
Disabled
Hard Disk Write Protect
Enabled
Enable/Disable device write protection.
This will be effective only if device is
accessed through BIOS.
IDE Detect Time Out
(Sec)
0~35
(at 5 interval)
Select the time out value for detecting
ATA/ATAPI device(s).
Host & Device
Host
ATA(PI) 80Pin Cable
Detection
Device
Select the mechanism for detecting
80pin ATA(PI) cable.