http://www.TYAN.com
29
Memory Installation Procedure
When you install the memory modules, make sure the module aligns properly with the
memory slot. The modules are keyed to ensure that it is inserted only one way. The
method of installing memory modules are detailed by the following diagrams.
Once the memory modules are firmly seated in the slot, two latches on either side will
close and secure the module into the slot. Sometimes you may need to close the
latches yourself.
To remove the memory module, simply push the latches outwards until the memory
module pops up. Then remove the module.
NOTE
YOU MUST ALWAYS
unplug the power connector from the
motherboard before performing system hardware changes.
Otherwise you may damage the board and/or expansion device.
