27
http://www.TYAN.com
3.4 – Floppy Configuration
Options related to floppy drives can be altered through the following.
Floppy A
Floppy B
360KB, 5 ¼”
1.2MB, 5 ¼”
720KB, 3 ½”
1.44MB, 3 ½”
2.88MB, 3 ½”
Disabled
Defines the floppy drive type.
3.5 – Boot Settings Configuration
Options related to startup settings can be altered through the following.
Quick Boot
Enabled
Disabled
When set to Enabled, some self-tests will be skipped
during POST.
Quiet Boot
Enabled
Disabled
If set to Enabled, OEM logo will be displayed instead
of POST messages.
Add-On Rom
Display Mode
Force BIOS
Keep Current
Leave as Default. This setting toggles the Add-On
ROM video display mode.
Boot up Num -Lock
On
Off
Specifies whether Num-Lock will be on or off during
bootup.
PS/2 Mouse
Support
Enabled
Disabled
Toggles the use of the PS/2 mouse port.
Typematic Rate
Fast
Slow
Changes speed of key repeat rate.
System Keyboard
Present
Unavailable
Will allow continual boot even if the keyboard is not
attached.
Parity Check
Enabled
Disabled
Toggles checking of system memory for corruption.
Wait for F1 if “error”
Enabled
Disabled
If Enabled, you will have to press F1 for the system to
continue booting if an error is detected during POST.
Hit “Del” Message
Enabled
Disabled
Toggles display of pressing DEL key to enter BIOS.
3.6 – Super IO Configuration
Options related to the IO interface can be altered through the following.
Serial Port 1, 2
Address
Enabled
Disabled
Toggles use of serial ports 1 and or 2.
Enabling
ports also requires you to enter the I/O address
Parallel Port Address
Disabled
3F8, 2F8
3E8, 2E8
These options are dependent on the IRQ and vice
versa.
Output Only
Standard one-way protocol for parallel devices.
Bi-directional
Two-way protocol
EPP
Enhanced Parallel Port may provide higher
bandwidth if an
EPP
compliant device is
Parallel Port Mode
ECP
Enhanced Compatibility Port may provide higher
bandwidth if an
ECP
compliant device is used).
Summary of Contents for THUNDER I7501 XTREME
Page 47: ...47 http www TYAN com ...
