26
http://www.tyan.com
Parity Check
Enabled
Disabled
Toggles checking of system memory for corruption.
Wait for F1 if “error”
Enabled
Disabled
If Enabled, you will have to press F1 for the system to
continue booting if an error is detected during POST.
Hit “Del” Message
Enabled
Disabled
Toggles display of pressing DEL key to enter BIOS.
3.6 – Super IO Configuration
Options related to the IO interface can be altered through the following.
Serial Port 1, 2
Address
Enabled
Disabled
Auto
Toggles use of serial ports 1 and or 2.
Enabling
ports also requires you to enter the I/O address for
that port unless you select
Auto
.
Onboard CIR Port
Enabled
Disabled
Toggles the onboard Serial 2 port.
Parallel Port Address
3F8, 2F8
3E8, 2E8
These options are dependent on the IRQ and vice
versa.
Output Only
Standard one-way protocol for parallel devices.
Bi-directional
Two-way protocol
EPP
Enhanced Parallel Port may provide higher
bandwidth if an
EPP
compliant device is used (e.g.
parallel Zip drive).
Parallel Port Mode
ECP
Enhanced Compatibility Port may provide higher
bandwidth if an
ECP
compliant device is used (e.g.
parallel Zip drive).
Parallel Address
378
278
3BC
These options appear when the parallel port is set
to
Enabled
.
3.7 – Onboard Device Configuration
Options related to onboard devices can be altered through the following.
Onboard ATI RageXL
Video
Enabled
Disabled
Toggles the onboard ATI video graphics.
Onboard 82550
Enabled
Disabled
Toggles 100Mbit LAN port.
Onboard 82544GC
Enabled
Disabled
Toggles 1Gbit LAN port.
Onboard SCSI
Enabled
Disabled
Toggles the onboard SCSI controller.
