TYAN S8812, User Manual

Page: 24 / 100

http://www.tyan.com
24
6. Close the socket cover and press the CPU socket lever down to lock the CPU
in place.
7. Repeat the same procedures to install the other CPUs.
Heat sink Installation
After installing the processor, you should proceed to install the heat sink. The CPU
heat sink will ensure that the processor do not overheat and continue to operate at
maximum performance for as long as you own them. The overheated processor is
dangerous to the motherboard.
For the safest method of installation and information on choosing the appropriate
heat sink, using heat sinks validated by AMD
®
. Please refer to the AMD
®
website:
http://www.amd.com
The following diagram illustrates how to install heat sink onto the CPU of S8812.
8.
Place the heat sink on top of the CPU and secure it to the motherboard with 2
screws.
9. Connect the heat sink Fan cable to the CPU0 FAN connector J55 .
10. Repeat the same procedures to install the other heat sinks ( CPU1 Fan: J9,
CPU2 Fan: J10, CPU3 Fan: J14 ).