TYAN S8238, User Manual

Page: 36 / 96

http://www.tyan.com
36
PWR 2: J34 4-Pin Molex Power Connector (Barebones use only )
Signal Pin Pin Signal
+12V
1 2
GND
GND
3 4
+5V
The 4-pin Molex Power Connector is provided for exclusive use
with the TYAN YR190-B8238-X2 barebones solution to provide
power for the HDD backplane.
2.12 Finishing Up
Congratulations on making it this far! You have finished setting up the hardware
aspect of your computer. Before closing up your chassis, make sure that all cables
and wires are connected properly, especially IDE cables and most importantly,
jumpers. You may have difficulty powering on your system if the motherboard
jumpers are not set correctly.
In the rare circumstance that you have experienced difficulty, you can find help by
asking your vendor for assistance. If they are not available for assistance, please
find setup information and documentation online at our website or by calling your
vendor’s support line.