manualshive.com logo in svg

TYAN S7105, Manual

Share
Download
TYAN S7105 Manual Download Page 152

 

http://www.tyan.com 

152

5.The system will boot to BIOS setup. A new menu item will appear at the far right 
of the screen. Scroll to the 'Recovery' tab, move the curser to “Proceed with flash 
update” and press the "Enter" key on the keyboard to start the BIOS recovery 
process.  

 

6.IMPORTANT: Do not power off or reboot the server during the BIOS recovery 
process. This can damage the BIOS recovery bootloader and prevent it from 
loading a subsequent time. 
7.Wait for the BIOS recovery procedure to complete. Completion is signified with 
the message “Flash update completed. Press any key to reset the system” 
displayed on screen. 
8.Remove the USB disk and reboot. 
 
If your system does not have video output or the POST code halts at “FF” on the 
right-lower portion of the screen, please contact Tyan representatives for RMA 
service. 
 

Summary of Contents for S7105





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands