TYAN S7065, User Manual

Page: 48 / 118

http://www.TYAN.com
48
NOTE: YOU MUST unplug the power supply before plugging the power cables
to motherboard connectors.
2.13 - Finishing Up
Congratulations on making it this far! You’re finished setting up the hardware
aspects of your computer. Before closing up your chassis, make sure that all
cables and wires are connected properly, especially power cables and most
importantly jumpers. You may have difficulty powering on your system if the
motherboard jumpers are not set correctly. In the rare circumstance that you
have experienced difficulty, you can find help by asking your vendor for
assistance. If they are not available for assistance, please find setup information
and documentation online at our website or by calling your vendor’s support line.