TYAN S5560, Manual

Page: 130 / 150

130
Status Code Description
0x74 South Bridge DXE initialization (South Bridge module specific)
0x75 South Bridge DXE initialization (South Bridge module specific)
0x76 South Bridge DXE initialization (South Bridge module specific)
0x77 South Bridge DXE initialization (South Bridge module specific)
0x78 ACPI module initialization
0x79 CSM initialization
0x7A
– 0x7F
Reserved for future AMI DXE codes
0x80
– 0x8F
OEM DXE initialization codes
0x90 Boot Device Selection (BDS) phase is started
0x91 Driver connecting is started
0x92 PCI Bus initialization is started
0x93 PCI Bus Hot Plug Controller initialization
0x94 PCI Bus Enumeration
0x95 PCI BUS Request Resources
0x96 PCI Bus Assign Resources
0x97 Console output devices connect
0x98 Console Input devices connect
0x99 Super IO initialization
0x9A USB initialization is started.
0x9B USB Reset
0x9C USB Detect
0x9D USB Enable
0x9E -0x9F Reserved for future AMI codes
0xA0 IDE initialization is started
0xA1 IDE Reset
0xA2 IDE Detect
0xA3 IDE Enable
0xA4 SCSI initialization is started.
0xA5 SCSI Reset
0xA6 SCSI Detect
0xA7 SCSI Enable
0xA8 Setup Verifying Password
0xA9 Start of Setup
0xAA
System has transitioned into ACPI mode. Interrupt controller is in
APIC mode.
0xAB Setup Input Wait
0xAC
System has transitioned into ACPI mode. Interrupt controller is in PIC
mode.