TYAN S5550 Manual Download Page 81

Page: 81 / 142

http://www.tyan.com

3.3.11 USB Configuration

USB Controllers / USB Devices

Read only.

Legacy USB Support

Enable USB legacy support. AUTO option disables legacy support if no USB
devices are connected. DISABLE option will keep USB devices available only for
EFI applications.

Enabled /

Disabled / Auto

XHCI Hand-off

This is a workaround for OSes without XHCI hand-off support. The XHCI ownership
change should be claimed by XHCI driver.

Enabled /

Disabled

USB Mass Storage Driver Support

Enable/Disable USB Mass Storage Driver Support.

Enabled /

Disabled

Port 60/64 Emulation

Enables I/O Port 60h/64h emulation support. This should be enabled for the
complete USB keyboard legacy support for non-USB aware OSes.

Enabled /

Disabled

Summary of Contents for S5550















































































































































Search results

Summary of Contents for S5550

Reviews:

Related manuals for S5550

Brands by name

Popular brands

TYAN S5550, Manual

Search results

Summary of Contents for S5550

Reviews:

Related manuals for S5550

Brands by name

Popular brands