TYAN S5533 User Manual Download Page 49

Page: 49 / 96

http://www.tyan.com

OROM UI and BANNER

If enabled, then the OROM UI is shown. Otherwise, no OROM banner or
information will be displayed if all disks and RAID volumes are Normal.

Enabled /

Disabled

HDD Unlock

If enabled, indicates that the HDD password unlock in the OS is enabled.

Enabled /

Disabled

LED Locate

If enabled, indicates that the LED/SGPIO hardware is attached and ping to locate
feature is enabled on the OS.

Enabled /

Disabled

IRRT Only on eSATA

If enabled, then only IRRT volumes can span internal and eSATA drives. If disabled,
then any RAID volume can span internal and eSATA drives.

Enabled /

Disabled

Smart Response Technology

Enable or disable Smart Response Technology.

Enabled /

Disabled

OROM UI Delay

If enabled, indicates the delay of the OROM UI Splash Screen is a normal status.

2 Seconds /

4 Seconds / 6 Seconds / 8 Seconds

Summary of Contents for S5533

































































































Search results

Summary of Contents for S5533

Reviews:

Related manuals for S5533

Brands by name

Popular brands

TYAN S5533, User Manual

Search results

Summary of Contents for S5533

Reviews:

Related manuals for S5533

Brands by name

Popular brands