TYAN S5191, Manual

Page: 54 / 81

54
http://www.tyan.com
3.4.4.2 FAN Control Sub-Menu
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
FAN Control Sub-Menu
Item Specific Help
Auto Fan Control
CPU FAN Input type select
FAN1 Input type select
FAN2 Input type select
FAN3 Input type select
[Disabled]
[4 Pin
]
[4 Pin
]
[4 Pin
]
[4 Pin
]
Auto Mode Fan Control
Parameters
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
← →
Select Menu Enter Select
X
Sub-Menu F10 Previous Values
Auto Fan Control:
This feature is used to set function of Auto Mode Fan Control.
Options: Enabled /
Disabled
CPU FAN / FAN1 / FAN2 / FAN3 Input Type Select:
These features are used to select 3 or 4 pin fan connector. After the setting, then
you can use the function of “Auto Fan Control”.
Options:
4 Pin / 3 Pin