Tomcat i7230A S5160
Chapter 3: BIOS Setup
http://www.tyan.com
40
3.3.3 I/O Device Configuration
This setting allows you to configure I/O devices.
Serial Port A:
This defines how the first serial port is detected and configured.
Disabled /
Enabled
Base I/O Address:
Set the base I/O address for serial port A.
3F8 /
2F8 / 3E8 / 2E8
Interrupt:
Set the interrupt for serial port A.
IRQ3 /
IRQ4
Parallel Port
This defines how the parallel port is detected and configured.
Disabled /
Enabled
Mode
This field allows the user to select the parallel port mode. The default value is Standard that
automatically selects the correct mode to use. The other modes are explained as follows:
SPP works with all parallel port devices. However, it is the slowest transfer mode and should
only be used when faster transfer modes cannot be used.
There are two faster bidirectional modes available - the ECP (Extended Capabilities Port) and
EPP (Enhanced Parallel Port) modes.
