Tomcat i7221A S5151
Chapter 3: BIOS Setup
3-23
http://www.tyan.com
Mode
Doze
Standby
Suspend
HDD Power Down
Min Saving
1 hour
1 hour
1 hour
15 min
Max Saving
1 min
1 min
1 min
1 min
Min Saving
/ Max Saving / User Define
Video Off Method
This option defines the method used to power off video. The various methods are as follows.
•
Blank Screen: The system BIOS will only send a blank screen when disabling video.
•
H SYNC + Blank: In addition to Blank screen, the BIOS will also turn off the V-SYNC
& H-SYNC signals from VGA cards to monitor.
•
DPMS:
Select this option if your monitor supports the Display Power Management
Signaling (DPMS) standard of the Video Electronics Standards Association VESA).
Use the software supplied for your video subsystem to select video power
management values.
Note
Green monitors detect the V/H SYNC signals to turn off their electron
guns. It is important to realize that the CRT consumes the most power
(several hundred watts) of any system. To really save energy, you must
shut it down when not in use.
Green monitors (also known as Energy Star monitors) reduce power usage by 90% without
actually turning off the CRT. To make a green monitor function properly you MUST use Video
Off Method = V/H Sync, because this tells the Green Monitor to shut down. If you incorrectly
use the "Blank Screen" setting then you will just get a blank screen that still consumes 100%
power. If you have a screensaver running, then you will not have CPU inactivity, and the
standard BIOS options will not shut the CRT down ever. So, turn OFF your screensaver in the
WINDOWS control panel, not in the BIOS.
Video Off in Suspend
This option defines the time frame in which the video will be disabled under current power
management settings. The settings are:
•
No: System BIOS will never turn off the screen.
•
Yes:
System BIOS turns of the screen when system is in SUSPEND mode.
Suspend Type
This option defines the system suspend type. The two suspend types are:
•
Power on Suspend:
If this is selected, the CPU will enter into Doze mode.
•
Stop Grant:
When selected, the CPU clock will enter Sleep mode.
In both of these modes, the system activities are detected by monitoring the IRQ signals or I/O.
Modem Use IRQ
This setting allows you to select the interrupt request (IRQ) line assigned to the modem (if any)
on your system. Activity of the selected IRQ always awakens the system.
NA /
3 /
4 / 5 / 7 / 9 / 10 / 11
Suspend Mode
This setting defines the method used to power down the system.
HDD Power Down
This setting defines the delay before the hard drive is powered down.
Intruder# Detection
