TYAN S3227 Manual Download Page 41

Page: 41 / 114

http://www.tyan.com

S5 RTC Wake Settings

Enable system to wake from S5 using RTC alarm.

Serial Port Console Redirection

Serial Port Console Redirection.

Option ROM Dispatch Policy

Option ROM Dispatch Poligy.

PCI Subsystem Settings

PCI, PCI-X and PCI Express Settings.

Network Stack Configuration

Network Stack Settings.

CSM Configuration

CSM configuration: Enable/Disable, Option ROM execution settings, etc.

USB Configuration

USB Configuration Parameters.

Realtak PCIe GBE Family controller (MAC: AO…)

Get driver information and configure Realtek Ethernet controller parameter.

NOTE:

The submenu will appear when a Realtek Ethernet chip is installed.

Intel® Etehrnet Connection X553/X557-AT 10GBASE-T)

Configure 10 Gigabit Ethernet device parameters.

NOTE:

The submenu will appear when an Intel Ethernet chip is installed.

Summary of Contents for S3227



















































































































Search results

Summary of Contents for S3227

Reviews:

Related manuals for S3227

Brands by name

Popular brands

TYAN S3227, Manual

Search results

Summary of Contents for S3227

Reviews:

Related manuals for S3227

Brands by name

Popular brands