background image

 

http://www.tyan.com

 

1

 

 

 

S3227 

 Version 1.0a

 

 
Copyright 

Copyright © 2017 MITAC COMPUTING TECHNOLOGY CORPORATION. All rights 
reserved. No part of this manual may be reproduced or translated without prior 
written consent from MITAC COMPUTING TECHNOLOGY CORPORATION. 

 

Trademark 

All registered and unregistered trademarks and company names contained in this 
manual are property of their respective owners including, but not limited to the 
following. 

 

TYAN

®

 is a trademark of MITAC COMPUTING TECHNOLOGY CORPORATION. 

Intel

®

 is a trademark of Intel

®

 Corporation. 

AMI

®

, AMIBIOS

® 

and combinations thereof are trademarks of AMI Technologies. 

Aptio BIOS is a trademark of American Megatrends, Inc. 
Microsoft

®

, Windows

®

 are trademarks of Microsoft Corporation. 

IBM

®

, PC

®

, AT

®

 and PS/2

®

 are trademarks of IBM Corporation. 

Winbond

®

 is a trademark of Winbond Electronics Corporation. 

Nuvoton

®

 is a trademark of Nuvoton Technology Corporation. 

 
Notice 

Information contained in this document is furnished by MITAC COMPUTING 
TECHNOLOGY CORPORATION and has been reviewed for accuracy and reliability 
prior to printing. MiTAC assumes no liability whatsoever, and disclaims any express 
or implied warranty, relating to sale and/or use of TYAN

®

 products including liability 

or warranties relating to fitness for a particular purpose or merchantability. MiTAC 
retains the right to make changes to product descriptions and/or specifications at 
any time, without notice. In no event will MiTAC be held liable for any direct or 
indirect, incidental or consequential damage, loss of use, loss of data or other 
malady resulting from errors or inaccuracies of information contained in this 
document. 
 
 

Summary of Contents for S3227



















































































































Reviews: