29
http://www.TYAN.com
Onboard FDC Controller
Enabled
Disabled
Leave this setting as it is.
Onboard Serial Port 1
Disable,
3F8/IRQ4
, 2F8/IRQ3, 3E8/IRQ4,
2E8/IRQ3,
Auto
Sets the address for the
onboard Serial Port .
Onboard Serial Port 2
Disable,
3F8/IRQ4,
2F8/IRQ3
, 3E8/IRQ4,
2E8/IRQ3,
Auto
Refer to this Manual
Chapter 2.09- LCD
CONNECTER (J20),
J20 pin header
UART Mode Select
Normal
IrDA
Askir
SCR
Set the UART Mode
UR2 Duplex Mode
Half
Full
Set the UR2 Duplex Mode
Onboard Parallel Port
Disable
378/IRQ7
278/IRQ5
3BC/IRQ7
Sets the address of the
onboard parallel port.
Parallel Port Mode
SPP
, EPP, ECP, ECP+EPP
Sets the operation mode
of the parallel port.
ECP Mode Use DMA
1
3
Configures the parallel
port DMA channel for the
selected ECP mode.
3.6 – Power Management Setup
Options related to power management can be altered through the following:
