TYAN S2932 Manual Download Page 53

Page: 53 / 94

3.7.7 Event Log Configuration Sub-Menu

You can use this screen to view the Event Log Control Menu. This logs

system events (such as CMOS clear) and writes the log into NVRAM. Use the
up and down arrow (

) keys to select an item. Use the Plus and Minus (+/-)

keys to change the value of the selected option. The settings are described on
the following pages.

BIOS Setup Utility

Main

Advanced

PCI/PnP Boot Security Chipset Exit

Event Logging details

View Event Log

Mark All Events as Read
Clear Event Log

View all unread events
on the Event Log.

←

→

Select Screen

↑↓

Select Item

+/- Change Option
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit

Feature

Option

Description

Event Logging details

View Event Log

Views all unread events on the
Event Log.

Mark All Events as Read

Cancel

Marks all unread events as
read.

Clear Event Log

Cancel

Erases all of events.

Summary of Contents for S2932































































































Search results

Summary of Contents for S2932

Reviews:

Brands by name

Popular brands

TYAN S2932, Manual

Search results

Summary of Contents for S2932

Reviews:

Brands by name

Popular brands