TYAN S2915-E, User Manual

Page: 20 / 77

http://www.tyan.com
20
JP13: PCI-X Speed Select Jumper
1
Open: 133MHz (Default)
1
Closed: Force to run at 100MHz
JP29: SAS Disable Jumper
1
Open: Enable SAS Controller (Default)
1
Closed: Disable SAS Controller
E50: Clear CMOS Jumper
1
3
(Clear)
1
3
(Default)
If you have lost your system/setup password or need to
clear the system BIOS settings, you can reset the
CMOS settings by using this jumper.
Power off the system and set E50 to (2-3) position, and
then power on to boot up the system. The CMOS will
be cleared when the screen is on. Finally shut down
the power, replace E50 to the default setting (1-2),
power on the system again.
J61: 1394 Disable Jumper
1
1
Open: Enable 1394 functionality (Default)
Closed: Disable 1394 functionality