TYAN S2891, Manual

Page: 50 / 71

http://www.tyan.com
50
IRQ3
Interrupt
IRQ4
Set the interrupt for serial
port B
Disabled
Parallel port
Enabled
Configure parallel port
using options.
378
Base I/O Address
278
Set the base I/O address
for parallel port.
IRQ5
Interrupt
IRQ7
Set the interrupt for parallel
port.
Output only
Mode
Bi-directional
Set the mode for parallel
port using options.
DMA 1
DMA channel
DMA 3
Set the DMA channel for
parallel port.
Disabled
Floppy disk controller
Enabled
Configure Floppy disk
controller using options.
Primary
Base I/O address
Secondary
Set the base I/O address
for parallel port.
3.6.7 – Console Redirection Sub-Menu
You can use this screen to select options for the Console Redirection
settings. Use the up and down <Arrow> keys to select an item. Use the <Plus>
and <Minus> keys to change the value of the selected option.
PhoenixBIOS Setup Utility
Advanced
Item Specific Help
Com Port Address
Baud Rate
Console Type
Flow Control
Console connection
Continue C.R. after POST
[Disabled]
[300]
[VT100]
[None]
[Direct]
[off]
F1: Help
↑↓
: Select Item -/+: Change Values F9: Setup Defaults
Esc: Exit
← →
: Select Screen Enter: Select Sub-Menu
F10: Previous Values