TYAN S2735 Manual Download Page 72

Page: 72 / 86

http://www.TYAN.com

2. Select

options

Format Disk

Verify Disk Media

and press the <Enter> key.

You are offered the following options:

Format Disk

— Simulates a format of the hard drive by writing zeros to the entire

disk.

Verify Disk Media

— Scans the media of a disk drive for defects. Any errors found

are corrected.

3. Press

Esc

to return to the previous menu.

Adaptec RAID Configuration Utility

Only drives present at POST are displayed

Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (*=default)

Adaptec Embedded SATA HostRAID Controller#0

Select SATA Disk and press <Enter>

SATA Port #0 Maxtor 6Y120M0 YAR51BW0

SATA Port #1     Maxtor 6Y120M0   YAR51BW0
SATA Port #2     No device
SATA Port #3     No device
SATA Port #4     No device
SATA Port #5     No device
SATA Port #6     No device
SATA Port #7     No device

Format Disk

Verify Disk Media

Summary of Contents for S2735























































































Search results

Summary of Contents for S2735

Reviews:

Related manuals for S2735

Brands by name

Popular brands

TYAN S2735, Manual

Search results

Summary of Contents for S2735

Reviews:

Related manuals for S2735

Brands by name

Popular brands