30
http://www.TYAN.com
3.6 – Super IO Configuration
Options related to the IO interface can be altered through the following.
Serial Port 1, 2
Address
Enabled
Disabled
Auto
Toggles use of serial ports 1 and or 2.
Enabling
ports also requires you to enter the I/O address for
that port unless you select
Auto
.
Parallel Port Address
3F8, 2F8
3E8, 2E8
These options are dependent on the IRQ and vice
versa.
Output Only
Standard one-way protocol for parallel devices.
Bi-directional
Two-way protocol
EPP
Enhanced Parallel Port may provide higher
bandwidth if an
EPP
compliant device is used (e.g.
parallel Zip drive).
Parallel Port Mode
ECP
Enhanced Compatibility Port may provide higher
bandwidth if an
ECP
compliant device is used (e.g.
parallel Zip drive).
Parallel Port
IRQ
IRQ 7
IRQ 5
Sets the interrupt request for the parallel port.
(IRQ 7 and IRQ 5 both can be defaults.)
3.7 – Onboard Device Configuration
Options related to onboard devices can be altered through the following.
Onboard ATI RageXL
Video
Enabled
Disabled
Toggles the onboard ATI video graphics.
Onboard 82551
Enabled
Disabled
Toggles 10/100Mbit LAN port.
Onboard 82545
Enabled
Disab led
Toggles the 1Gbit LAN port.
3.8 – USB Configuration
Options related to USB can be altered through the following.
USB Function
Enabled
Disabled
Toggles the onboard USB ports.
Legacy USB Support
Enabled
Disabled
Auto
Toggles the use of onboard USB p orts in DOS.
USB Zip Emulation Type
Enabled
Disabled
Auto
Toggles Zip drive emulation on USB ports
when in use.
USB Beep Message
Enabled
Disabled
Toggles USB beep error messaging.
3.9 – Hardware Monitor
Hardware Monitor
Reports CPU temperatures, voltage, and fan speeds.
