TYAN S2095 Manual Download Page 22

Page: 22 / 34

http://www.tyan.com

3.1 Main Setup

In this section, you can alter general features such as the data and time, as well as access to the
IDE configuration options. Note that the options listed below are for options that can directly be
changed within the

Main Setup

screen.

System Time

HH: Hours (24 hour format)
MM: Minutes
SS: Seconds

Adjusts the system clock.

System Date

MM: Month
DD: Day
YYYY: Year

Adjusts the system date.

3.2 Advanced BIOS Features

Options related to the IO interface can be altered through the following.

Virus Warning

Disabled
Auto

This settings toggles virus
protection on or off for boot sector
writes.

CPU L1 & L2 Cache

Enabled

Disabled

Toggles the use of CPU L1 and L2
cache

Quick Power On Self Test

Enabled

Disabled

This option allows the system to
skip self tests for faster startup.

First, Second, Third, Other

Boot Device

Options Dependant on
system.

Selects the startup device
sequence.

Swap Floppy Drive

Enabled

Disabled

This option switches A: to B: drive.

Boot Up Floppy Seek

Enabled

Disabled

This option causes the floppy
drives to be detected at startup.

Boot Up NumLock Status

Off

Sets the Num Lock on or off.

Gate A20 Option

Enabled

Disabled

Leave as default.

Typematic Rate Setting

Enabled

Disabled

Toggles control of keyboard key
repeat rate.

Typematic Rate

(chars/Sec )

, 8, 10, 12, 15, 20, 24, 30

Defines how many characters are
repeated per second when holding
down a key on the keyboard.

Typematic Delay (MSec)

250

, 500, 750, 1000

Defines the delay that occurs at
key stroke before that key will start
to repeat.

Security Option

Setup

System

Sets the password on either just
the BIOS setup or the entire
system (BIOS setup included).

OS Select for DRAM >

64MB

Non-OS2

OS2

Select OS2 only if you are running
OS/2 operating system with more
than 64MB of RAM.

Small Logo(EPA) Show

Enabled

Disabled

Toggles the display of the EPA
Energy Star logo at POST.

Summary of Contents for S2095



































Search results

Summary of Contents for S2095

Reviews:

Related manuals for S2095

Brands by name

Popular brands

TYAN S2095, Manual

Search results

Summary of Contents for S2095

Reviews:

Related manuals for S2095

Brands by name

Popular brands