21
S1680S-001-02
3.4.5: Removal of the Pentium II Passive Processor and CPU
Retention Module
To remove the CPU, move the locks to the center of the CPU. A
click will be heard when the CPU has been unlocked. Gently pull up
on the CPU, taking care not to bend the motherboard or the CPU
Retention Module.
To remove the lock from the Retention Bracket, gently press the ends
of the locks inward and pull.
3.4.6: Removal of the Heat-Sink Lock
Heat-sink Lock
3.4.4: Installation of the Heat-sink
Lock
The Heat-sink lock has 4 notches which will
correspond to the 4 pins on the Heat-sink mounting bracket. Gently slide
the lock between the Heat-sink onto the Heat-sink mounting bracket until
both sides of the lock are firmly secured. A clicking sound will be heard
when the lock is securely fastened to the Heat-sink mounting bracket. To
remove the lock from the Heat-sink mounting bracket, gently press the
ends of the locks inward and pull.
