manualshive.com logo in svg

TYAN S1562, Manual, Page: 12 / 66

Share
Download
TYAN S1562 Manual Download Page 12

12

S1562-001-01

3.3 CMOS RTC

CMOS RTC includes an internal battery and Real Time Clock circuit. It
provides the date and the time for the system. Normally the life span of a
RTC internal battery is 10 years. When replacing, you should use the same
model.

3.4 Speaker Connector Installation

S1562 provides a 4-Pin header (J23) to connect the speaker.  The polarity
can go either way.

3.5 Turbo Switch

The front panel on your case may have a turbo switch to control system
speed when slower program  execution is required for software developed
in the old XT days.

The Intel 430HX chipset doesn't support a de-turbo mode, but the S1562
has a connector (J26) for the cable that may come with the case.

3.6 Turbo LED Connector Installation

The TURBO LED on the  front case panel can indicate the current speed
status of the system.  The TURBO LED connector should be installed to
J25  in the correct direction.

Voltage Regulator

The Default setting will work with most Pentiums CPU's.
The 6x86 will have a marking on it that will identify the
voltage that it requires.
"016" marking on Cyrix chip uses a 3.3V setting.
"028" marking on Cyrix chip uses a 3.48V setting.

Default

3.3V

3.48V 3.6V

   J37

On

Off

Off

   J38

Off

Off

On

   J39

Off

On

Off

Summary of Contents for S1562



































































Reviews:

No comments