manualshive.com logo in svg

TYAN GA80-B7061, Service Engineer'S Manual

Share
Download
TYAN GA80-B7061 Service Engineer'S Manual Download Page 166

 

 

http://www.tyan.com

 

166

Appendix IV: Technical Support 

 
 
If a problem arises with your system, you should first turn to your dealer for direct 
support. Your system has most likely been configured or designed by them and 
they should have the best idea of what hardware and software your system 
contains. Hence, they should be of the most assistance for you. Furthermore, if 
you purchased your system from a dealer near you, take the system to them 
directly to have it serviced instead of attempting to do so yourself (which can 
have expensive consequence). 
 
 
If these options are not available for you then MiTAC International Corporation 
can help. Besides designing innovative and quality products for over a decade, 
MiTAC has continuously offered customers service beyond their expectations. 
TYAN’s website (http://www.tyan.com) provides easy-to-access resources such 
as in-depth Linux Online Support sections with downloadable Linux drivers and 
comprehensive compatibility reports for chassis, memory and much more. With 
all these convenient resources just a few keystrokes away, users can easily find 
their latest software and operating system components to keep their systems 
running as powerful and productive as possible. MiTAC also ranks high for its 
commitment to fast and friendly customer support through email. By offering 
plenty of options for users, MiTAC serves multiple market segments with the 
industry’s most competitive services to support them.   
 
 
TYAN's tech support is some of the most impressive we've seen, with great 
response time and exceptional organization in general.” — Anandtech.com 
 
 
Please feel free to contact us directly for this service at [email protected] 
 

Help Resources: 

 
1. See the TYAN’s website for FAQ’s, bulletins, driver updates, and other 

information: http://www.tyan.com 

2. Contact your dealer for help before calling TYAN. 
3. Check the TYAN user group: alt.comp.periphs.mainboard.TYAN 
 
 

Summary of Contents for GA80-B7061








































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands