TYAN FT77CB7079, Service Engineer'S Manual

Page: 163 / 186

http://www.tyan.com
163
Status Code Description
0x2C Memory initialization. Memory presence detection
0x2D
Memory initialization. Programming memory timing
information
0x2E Memory initialization. Configuring memory
0x2F Memory initialization (other)
0x30 Reserved for ASL (see ASL Status Codes section below)
0x31 Memory Installed
0x32 CPU post-memory initialization is started.
0x33 CPU post-memory initialization. Cache initialization
0x34
CPU post-memory initialization. Application Processor(s)
(AP) initialization
0x35
CPU post-memory initialization. Boot Strap Processor (BSP)
selection
0x36
CPU post-memory initialization. System Management Mode
(SMM) initialization
0x37 Post-Memory North Bridge initialization is started.
0x38
Post-Memory North Bridge initialization (North Bridge module
specific)
0x39
Post-Memory North Bridge initialization (North Bridge module
specific)
0x3A
Post-Memory North Bridge initialization (North Bridge module
specific)
0x3B Post-Memory South Bridge initialization is started
0x3C
Post-Memory South Bridge initialization (South Bridge
module specific)
0x3D
Post-Memory South Bridge initialization (South Bridge
module specific)
0x3E
Post-Memory South Bridge initialization (South Bridge
module specific)
0x3F
– 0x4E
OEM post memory initialization codes
0x4F DXE PIL is started